SIPTRUNK.com Configuration Guide For Cisco/Linksys PAP2T/SPA112

On System Tab, set Primary NTP to: time.nist.gov

On SIP Tab, set STUN enable to YES and set STUN Server to: stun.siptrunk.com

On Regional Tab,

Ring Waveform: Sinusoid

Ring Voltage: 95

CPC DELAY = .2

CPC DURATION = .6

Time Zone: EST= GMT-05:00, CST=GMT-06:00, MST=GMT-07:00, PST=GMT-08:00

Daylight Saving Time Rule: start=3/8/7/2:0:0;end=11/1/7/2:0:0;save=1

On Line 1 make sure SIP Remote Party-ID is YES

also make sure NAT Mapping Enable is YES and NAT Keep Alive Enable is YES

On Line 1 under Proxy and Registration:

Proxy: gw.siptrunk.com

Use DNS SRV: YES

DNS SRV Autoprefix: YES

On Line 1 under Subscriber Information:

Enter USER ID and Password from SIPTRUNK.com site (User = Trunk # and Password is SIPTRUNK.com Trunk Password)

On Line 1, USE THIS DIALPLAN: ([49]11|[933]|1xxx[2-9]xxxxxxS0|<:1>[2-9]xxxxxxxxxS0|<011:>x.)

***To ensure that inbound calls work properly, go to the "SIP Trunking" tab, and select "Modify Trunk." Then ensure that "Contact Override" is set to "OFF."***

 
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk