SIPTRUNK Configuration Guide for the Grandstream HT701

Connecting the Grandstream HT701 to a SIPTRUNK trunk:

1.  Unbox your HT701, and connect the cables in the following order:

  • Insert a standard RJ11 telephone cable into the Phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone.
  • Insert the Ethernet cable into the Internet or LAN port of the HT701 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.)
  • Insert the power adapter into the HT701 and connect it to a wall outlet

2. Allow a minute or two for the HT701 to boot up and get an IP address.

3. Pick up the connected analog phone, and dial *** to enter the IVR.

4. Dial 02 to hear the assigned IP address. Write this address down.

5. Type the assigned IP address into the address bar of your web browser (Google Chrome, Internet Explorer, Mozilla Firefox, etc.) and press ‘Enter’ or ‘Search’ to access the web configuration page.

6. In the web page that opens, type admin as the password, then click Login. You will see the following page:

7. In a separate web page, log into your SIPTRUNK account

8. Click the SIP Trunking tab, then select Trunks.

9. Collect the following information from your trunk:

  • The Trunk #
  • The password


10. Go back to the Grandstream device page, and select the FXS PORT tab

11.  Enter the trunk information as shown below, using your account details collected from SIPTRUNK where:

  • SIP User ID = Trunk #
  • Authenticate ID = Trunk #
  • Authenticate Password = Trunk Password
  • Primary SIP Server =
  • Failover SIP Server =

12. Set NAT Traversal to STUN

13. Scroll down the page, and paste the following in the Dial Plan field: {[49]11 | [933] | 1xxx[2-9]xxxxxx | <=1>[2-9]xxxxxxxxx | <011=>x.}

14. At the bottom of the page, click Apply, then Reboot

15. Select the Advanced Settings Tab

16. Set the STUN server to

17. Choose the STATUS tab, and confirm that the device shows it is registered.

 18. Your Grandstream HT701 is now registered to SIPTRUNK!

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


  • Avatar
    Stephen Quinn


    Edited by Stephen Quinn
Powered by Zendesk